Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 185)

185 K2 Storage Area Network Installation and Service Manual 26 October 2009
Configuring the redundant server B
You must wait for the primary K2 Media Server to restart before continuing. To
verify, from the control point PC open the MS-DOS command prompt and use the
“ping” command.
After you have configured the first K2 Media Server (server A) you next configure
the redundant K2 Media Serer (server B).
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring as server B.
Metadata Server
Configuration
Enter the name or IP address of K2 Media server B. This is the redundant
partner of the server you are now configuring.
Click
Next .
FTP Server Configuration
This page appears only if the
server has the role of FTP
server.
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The server restarts. Wait until all
startup processes have completed before continuing.
On this page… Do this…