Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 243)

243 K2 Storage Area Network Installation and Service Manual 26 October 2009
2. For the Real Time Input/Output (RTIO) rate, enter the value specified by your
system design. If you do not know this value, contact your Grass Valley
representative.
3. If the K2 SAN is to be accessed by only K2 clients you can leave Windows
Security unchecked. If accessed by Aurora Edits, refer to the Aurora Edit
Installation and Configuration Guide for instructions.
4. Click OK . The Configuration File dialog box opens.
The configuration file for the media file system is displayed. You can verify media
file system parameters by viewing this file. Do not edit this file. Click
Accept .
A “…Please wait…” message box displays progress and a “…succeeded…”
message confirms the process is complete.
5. A message informs you that you must restart the K2 Media Server, however the
restart at the end of the Configure K2 Server wizard suffices, so you do not need to
restart now.
6. Close the Storage Utility.
NOTE: Do not attempt to start K2 clients or otherwise bring the K2 SAN online
until instructed to do so later in this chapter.
7. Continue with the next procedure.