Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 320)

26 October 2009 K2 Storage Area Network Installation and Service Manual 320
Configuring optional NH servers
Configuring optional NH servers
If you have one or more optional NH K2 Media Servers, you next configure those
servers. This section applies to both NH1 (1 Gig FTP) servers and NH1-10GE (10 Gig
FTP) servers.
NOTE: Multiple NH servers on a K2 SAN must be of the same type, either all NH1
or all NH1-10GE.
SCSI Bridge Server
Configuration
This page manages the
components that bridge
between iSCSI (the GigE
media network) and the
RAID storage. You
configure network settings
on the iSCSI adapter and the
page validates that the media
RANKs are visible as iSCSI
targets.
Select Backup .
Select an iSCSI adapter and click Modify . A network configuration
dialog box opens. Verify or enter the media network IP address and
subnet mask and click
Apply . Do the same for the other iSCSI adapter.
Click Next .
FTP Server Configuration
This page appears only if the
server has the role of FTP
server.
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished.
On this page… Do this…