iSys V12 Thermal Printer - Manual (Page 12)

12
INSTALLATION
3.1 UNPACKING
Although shipments are thoroughly checked for completeness by The Imaging Systems Group,
please confirm that your plotter has the following:
1. Power cord - North American.
2. Sample roll of paper.
3. Fan-fold paper guide.
4. Two spindle hubs and one spacer (for 11.65 and 12 inch paper), or: spindle and sleeve hub
(for 8.75 inch paper) - Options.
Confirm that all specified options are present, such as a data cable or a fan-fold feeder tray.
Inspect the plotter and components for any damage that may have occurred during shipment.
Report any damage to the carrier of the shipment, and to your Imaging Systems Group
customer service representative.
Keep the box and packaging for future shipping, in the event of servicing or upgrading issues.
This product must be returned to our factory in the original or proper packaging material.
Damage caused during return shipping or due to improper packaging will not be covered by The
Imaging Systems Group. During shipping or storage, place a length of thermal paper between
the printhead and roller. This prevents damaged caused by the two components sticking
together.
Figure 3-1 . V12 components