iSys V12 Thermal Printer - Manual (Page 9)

9
SPECIFICATIONS
2.1 FUNCTIONAL
Operation
Command panel
Top mounted on the desktop version.
Front mounted on the rackmount version.
Full function alphanumeric display.
Four push buttons.
LED display.
Command modes Plotting mode.
Printing mode.
Features Microprocessor controlled.
Two custom user settings.
User settings stored while power off.
Automatic head temperature feedback.
Panel settings On-line, off-line.
User 1 and User 2 custom settings.
Manual plot speed select: 1.0, 2.0, 3.0 and 4.0 inches per second (ips).
Manual plot width selection: 216, 216 right justified, 264, 264 right
justified and 296 bytes per scan (bps).
Test plot, test print.
203 dots per inch (dpi) vertical resolution - standard.
200 dots per inch (dpi) vertical emulation.
Vertical scaling: From no scale to +30/64” in 1/64” increments.
Media selection: Light paper, heavy paper, light film, heavy film. 10 Contrast settings: C1,
C2, C3, C4, C5, C6, C7, C8, C9, C10. Manual form advance. Form feed.
Form feed length adjust: 1.0, 2.0, 3.0, 4.0, 6.0, 8.0, 10.0, 12.0, 14.0, 16.0
inches, top of form (TOF) sensing, programmable past top of form
(PTOF).
TOF voltage detection.
Beeper select: On, off, pulsed audible alert.
24 volt error warning.
Thermistor error warning.
Plot speeds 1. 1.0 inch per second.
2. 2.0 inches per second.
3. 3.0 inches per second.
4. 4.0 inches per second.
5. Film mode: 1.0 inch per second.
Condition detection Media out.
Top of form.
Head temperature.
Idle state power supply shutdown.
Top of form voltage.