Extron Electronics Matrix 200 - Manual (Page 33)

Extron • Matrix 200 • User’s Manual
Chapter 3 • Rear Panel Connections
3-1
Multi-Output Connection
When using the Matrix 200 to switch different types of video signals, the signal
output from the switcher is in the same format as the corresponding input. That
is, RGB and Sync (composite or separate H&V) signals will pass through the
RGB and SYNC output; NTSC and PAL video signals will pass through the
composite video output; and S-Video will pass through the S-Video output.
Therefore, if multiple input signal types are used in the same switcher, the same
multiple outputs must also be directed to the output devices.
In the diagram below, the Matrix 200 supplies RGB output for large screen
projectors and data monitors, composite video output for an LCD projector, and
audio output for a stereo audio system.
The following pages show possible connections.