Extron Electronics Matrix 200 - Manual (Page 66)

Extron • Matrix 200 • User’s Manual
Chapter 4 • Using the Front Panel Controller
Ties, Configurations and Presets
Only one configuration may be active at one time, and only one Tie (or set of
Ties) may be viewed at one time. Therefore, the only way to view each of the
stored Presets is to load (activate) each preset and then view each set of Ties in
that configuration (as shown in Example #2).
Example #3
This example shows a
configuration with seven Ties, or
sets of Ties. RGBS and Audio
are shown as separate lines.
Example #4
This configuration shows a an
8x4 matrix with four sets of Ties.
RGBS and Audio are shown as
separate lines.
_______ Rather than try to remember the configuration for each preset, worksheets may
be used to record this information. Make copies of the worksheets provided on
the next page and use one for each Preset configuration.
Example #5
This configuration was stored as
Preset 7. It has one set of Ties
for Input 8. Because it was
stored to do test patterns, only
RGBS is tied to the Video Test
Generator source.
When diagramming for more
than one I/O module, use
different colors for each I/O
module.
For our own records, we chose
the title “Test Patterns”.
Because the matrix is 8x4,
outputs 5 - 8 have been crossed
out in this example.
Matrix 200 Configuration Worksheet
Matrix 200 (8x4) Preset example
Matrix 200 (8x8) Preset example
4-24