Extron Electronics Matrix 200 - Manual (Page 7)

Extron • Matrix 200 • User’s Manual
Contents
Matrix 200 User’s Manual
68-126-01, Rev. A
Rev. B, 59-03
Rev. C, 69-03, added Chapter 5
Rev. C1, 79-03, new format
Rev. D, 79-08
Written and printed in the USA
iv
CMD20 (44h) - Operate Program .................................................................... B-16
CMD22 (46h) - Set Clock ................................................................................ B-16
CMD23 (47h) - Request the Clock Information ................................................ B-17
CMD24 (48h) - Turn Executive Mode On/Off ................................................... B-17
CMD25 (49h) - Set RGB Delay ....................................................................... B-17
CMD26 (4Ah) - Request RGB Delay Information ............................................ B-17
CMD27 (4Bh) - Set Baud Rate ........................................................................ B-18
CMD28 (4Ch) - Download Baud Rate ............................................................. B-18
CMD29 (4Dh) - Set Operating Mode ............................................................... B-18
CMD31 (4Fh) - Set Slave Coordinates ............................................................ B-19
CMD32 (50h) - Request Slave Coordinates .................................................... B-19
CMD33 (51h) - Identify Port ............................................................................ B-19
CMD34 (52h) - Set Security Passcode ........................................................... B-19
CMD35 (53h) - Operate Security .................................................................... B-20
CMD36 (54h) - Set Audio Parameters ............................................................. B-20
Configure Audio Inputs .................................................................................... B-21
Configure Audio Outputs ................................................................................. B-21
CMD37 (55h) - Request Audio Parameters ..................................................... B-22
Reports (Matrix-to-Host) .............................................................................................. B-23
Report0 (70h) - Status .................................................................................... B-23
Report1 (71h) - New Controlling Port .............................................................. B-23
Legend of Icons
The following icons may be used in this manual:
___________ Important information – for example, an action or a step that must be done
before proceeding.
___________ A Warning – possible dangerous voltage present.
___________ A Warning – possible damage could occur.
___________ A Note, a Hint, or a Tip that may be helpful.
___________ Possible Electrostatic Discharge (ESD) damage could result from touching
electronic components.
___________ Indicates word definitions. Additional information may be referenced in another
section, or in another document.