Extron Electronics Matrix 200 - Manual (Page 60)

Extron • Matrix 200 • User’s Manual
Chapter 4 • Using the Front Panel Controller
Miscellaneous Menu (9)
This menu is used to set the baud rate of the serial communications with the host
controller via the RS-232/RS-422 serial port. The menu can also display the
software version for the Main Controller and for the FPC. Provision for displaying
and setting the internal clock is also provided. The five Miscellaneous Submenus
are:
• Show Local FPC Software Version
• Show Main Controller Software Version.
• Set Host Baud Rate
• Show Time/Date
• Set Time/Date
Descriptions follow.
To select this menu, press Menu, followed by “9”.
Selecting Submenus
With the Miscellaneous Menu displayed and the cursor at position 0,0, use the
Up/Down cursor keys to sequence through the five submenus until the desired
submenu is displayed.
Display FPC Software Version Submenu (menu 9)
This submenu is used to display the version number of the FPC software. This
is a view-only submenu; no user input is required. With the cursor at position
0,0, use the Up/Down cursor keys to display “LOCAL FPC” on the bottom row of
the display. Read software version at positions 1,12 thru 1,15.
Display Main Controller Software Version Submenu (menu 9)
This submenu is used to display the version number of the Main Controller
software. This is a view-only submenu; no user input is required. With the cursor
at position 0,0, use the Up/Down keys to display the menu shown here. The
software version is in the lower-right corner.
_______ The software version numbers for the FPC and the Main Controller board will not
necessarily be the same. They are updated separately.
4-18