Rose Electronics QuadraVista QF - Manual (Page 11)

QuadraVista QF Installation and Operations Manual 5
Figure 3. Buttons
- Buttons 1 to 4: These buttons activate the corresponding CPU channel (computer port).
- Full button: Press to switch to Fullscreen mode.
- Quad button: Press to switch to Quad mode.
- PiP button: Press to switch to picture in picture mode (PiP).
- Win button: Press to switch to Win mode.
Selector icon
Figure 4. Hot Key Channel Selection Window
You can also switch the active channel using the hotkey and arrow keys. The selection window closes
once the channel selection timeout period has elapsed. The timeout value for channel selection can be
changed in the OSD System menu by selecting Quad mode. Then use the “Time out of Channel
Selection” menu item to indicate how long the selector icon should be displayed on the screen.
Additional Button Functions
Setting output resolution to safe output modes
To set the output resolution to 640 x 480 @ 60 Hz, press and hold buttons 1 and 2 simultaneously for 2
seconds.