Rose Electronics QuadraVista QF - Manual (Page 35)

QuadraVista QF Installation and Operations Manual 29
Console
Video output / Keyboard / Multi-Monitor / EDID
Selecting “Console” from the main menu displays the options for the video output, keyboard, Multi-monitor,
and EDID.
Use Up / Down arrow keys to show
additional modes
Setting the video output to
“auto” the QuadraVista will
read the connected
monitor’s configuration data
and set the mode,
resolution, and frequency
based on the monitors
DDC table. Use the up /
down arrow keys to
manually select a specific
mode, resolution, and
frequency. The new setting
will display for 10 seconds.
Within this time, press
Enter / select to accept the
new video output setting.
No change is executed if
enter is not pressed within
the 10 second period. See
Appendix D for a list of
supported video modes