Rose Electronics QuadraVista QF - Manual (Page 48)

SERIAL OPERATION
42 QuadraVista Installation and Operations Manual
Serial Features
QuadraVista can be configured or controlled from a remote computer by connecting a serial cable from the
computer’s COM port to the QuadraVista’s serial input port.
To remotely configure the QuadraVista (Display / execute the OSD features only), download the
communication software (QuadraVista.zip) from our web site at /www.rose.com/htm/download.htm in the
tech support section and install it on a remote windows based computer. Next, call up the OSD from the
local console and navigate to the “System, Control” section and change the DCP mode setting to “control”.
Connect a serial cable from COM1 or COM2 port on the remote Laptop or PC to the RS232 port on the
rear panel of QuadraVista as shown below
Figure 45, Serial connections
Execute the Serial Communication software and the window shown below will display.
Click on the ICON to connect and display the OSD on the remote computer
Remote
Laptop or PC
Serial
Cable
DB9F to RJ45M
P/N CAB-QVRJ006
RS 232
Port