Rose Electronics QuadraVista QF - Manual (Page 22)

16 QuadraVista Installation and Operations Manual
System / HotKey
The system HOTKEY window is used to define the multiple keys HOTKEY and Double Click HOTKEY
features. To modify the HOTKEY features, call up the Main menu (Default = left Ctrl + Alt + O key). From
the Main menu, highlight “SYSTEM” and press enter. Highlight “HOTKEY” and press enter. The
SYSTEM / HOTKEY window shown in Figure 4 will display.
Figure 13. HotKey menu
From this menu you can modify which multiple
keys and Double Click key defines the
HOTKEY. Use the arrow keys to navigate
through the menu. Select “Yes” or “No” to
choose 1-4 keys for the HOTKEY.
Press the + key to switch to the double click
menu.
The double click HOTKEY activation menu
allows you to define which key to double click
on to be the HOTKEY.
Use the arrow keys to select one of four key
choices to define the double click HOTKEY
method.