Rose Electronics QuadraVista QF - Manual (Page 45)

QuadraVista QF Installation and Operations Manual 39
Figure 41. EDID Programming
When the window to the above right displays
and before pressing ENTER / SELECT twice,
disconnect the console monitor cable and the
computer monitor port to program. Connect a
DVI male to male cable from the video output
to the computer video input to program (1-4).
The video will go blank and programming
must be executed blindly. When the DVI
cable has been connected, press ENTER /
SELECT twice to program the additional
video modes. Reconnect the console monitor
and computer monitor cable and the display
to the right will display. Repeat this
procedure for the other three video input ports
if necessary.