Rose Electronics QuadraVista QF User Manual

Page 31

Advertising
background image

QuadraVista QF Installation and Operations Manual

25

System / Disable Channel

Using this feature, the connected computers should be connected to the channel ports in ascending order.
Connecting computers to channel 1, 2, and 4 and selecting the number of channels to be 3, channel 4 can
not be displayed.

Figure 20. System / Disable Channel

System / Control

Figure 21. System / Control

The DCP (Device Control Protocol) offers three modes, off, control and synchronize. Set the DCP mode
to “Control” if a single QuadraVista will be controlled from an external computer. Set the mode to
“Synchronize” if you system features several linked QuadraVista’s. When in this mode the QuadraVista
status is transmitted to the external computer. For local unit operation, set the mode to off. See the Serial
Operations
section for detailed information on the DCP mode.

Use the Disable Channel function to
select the number of channels to
display. If computers are connected to
channel 1, 2, and 3, then select 3.

The system / control feature allows setting
up of the QuadraVista from a computer or
external device connected to the serial
port.
Selecting control allows external control of
the OSD.
Selecting synchronize will keep cascaded
QuadraVista units in the same video
mode.

See the Serial Operations Section.

Advertising