Rose Electronics QuadraVista QF - Manual (Page 12)

MODELS
6 QuadraVista Installation and Operations Manual
Figure 5. Buttons for Resetting Output Resolution
Using this feature is recommended when you cannot use the OSD, because the on screen display is dark
or illegible due to an output resolution setting which is not supported by the monitor. Once the widely
supported 640x480@60 Hz output is set, you can then use the OSD to choose a resolutions that the
monitor in use supports. Alternatively, hold buttons 1 and 2 for 2 seconds at a time to cycle through the
following standard video modes: VGA 640x480@60Hz, SVGA 800x600@60 HZ, XGA 1024x768@60 Hz,
UXGA 1600x1200@60 Hz.
Hardware Reset
Press and hold buttons 3 and 4 simultaneously for 5 seconds to reset the Unit completely (video, keyboard,
and mouse).
Figure 6. Buttons for Resetting Hardware
Displaying the OSD
Press and hold the Pip and Win buttons simultanously to cause the OSD menu to be displayed.
Figure 7. Buttons for Displaying the OSD
Note:
While the OSD menu is displayed, the active computer can still be operated by mouse or touchscreen.