Emerson MICRO MOTION 1700 - Manual (Page 115)

Input/output signals – Model 2700 transmitter with intrinsically safe
outputs Table 10-5:
Type Description
Output variables • Mass & volume flow
• Net product content / flow
• Temperature
• Density
• Concentration
Inputs/outputs • Intrinsically safe
• Two passive 4–20 mA outputs
• One passive frequency output
• Frequency output can be configured as a discrete output
HART/WirelessHART • Bell 202 signal is superimposed on the primary milliamp out-
put
• WirelessHART available via THUM adapter
• HART communication is unavailable on Foundation fieldbus
and PROFIBUS-PA transmitter versions
Input/output signals – Model 2700 transmitter with configurable inputs/
outputs Table 10-6:
Type Description
Output variables • Mass & volume flow
• Net product content / flow
• Temperature
• Density
• Concentration
Inputs/outputs • Not intrinsically safe
• One or two active 4–20 mA outputs
• One or two active/passive frequency outputs
• One or two active/passive discrete outputs
• One discrete input
HART/WirelessHART • Bell 202 signal is superimposed on the primary milliamp out-
put
• WirelessHART available via THUM adapter
• HART communication is unavailable on Foundation fieldbus
and PROFIBUS-PA transmitter versions
10.3 Local display
The local display is an optional component. Transmitters can be ordered with or without a
local display. A localized Chinese-language display is also available for purchase in China
only.
Specifications
Installation Manual 111