Roland VR-4HD HD AV Mixer - Manual (Page 40)

40
Other Features
Turning Off the Power Automatically
(Auto Off)
Auto Off is a feature that automatically turns off the power after no
operation for a specific period of time. This helps prevent wasting
electrical power.
By factory default, the Auto Off function is set on. When the states
described below persist for 240 minutes, the Auto Off function acts to
automatically turn off the power.
5 No operation performed on the VR-4HD
5 No audio or video input
To turn the Auto Off function off or on, follow the steps below to
change the setting.
MEMO
5 When the power has been turned off by the Auto Off function, to
restart, first press the [POWER] button to return it, then turn on
the power.
1.
Press the [SYSTEM SETUP] button to display the setup screen.
2.
Select <SYSTEM> to display the SYSTEM menu.
3.
Select <AUTO OFF>.
4.
Use the [VALUE] knob to set the Auto Off function on or off.
Value Explanation
ON The Auto Off function is turned on. Power is turned off automatically.
OFF
The Auto Off function is turned off. Power is not turned off
automatically.
6.
Press the [SYSTEM SETUP] button several times to quit the
setup screen.
Returning Settings to the Factory-
default State (Factory Reset)
You can return the values of settings on the VR-4HD to their factory
defaults.
If operation that differs from what is described in the owner’s manual
occurs even when the steps described are followed correctly, try
performing a factory reset.
NOTE
5 Performing a factory reset causes all settings made and values
saved in memory (p. 38) to be lost.
1.
Press the [SYSTEM SETUP] button to display the setup screen.
2.
Select <SYSTEM> to display the SYSTEM menu.
3.
Select <FACTORY RESET>.
4.
Check the message and select <OK>.
(If you want to quit, select <CANCEL>.)
A factory reset is executed.
5.
Press the [SYSTEM SETUP] button several times to quit the
setup screen.