Panel descriptions – Roland SPD-SX Sampling Pad with 4GB Internal Memory (Black) User Manual
Page 11
Panel Descriptions
Panel Descriptions
11
Number Name
Explanation
Page
1
Pad 1–9
Play pads 1–9 by playing them with sticks.
Pad indicator
1–9
These indicators are located at the lower right of each pad.
They will light when the pad is struck.
2
[POWER] button
Turns the power on/off.
3
[MASTER] knob
Adjusts the volume of the MASTER OUT jacks.
[PHONES] knob
Adjusts the volume of the PHONES jack.
[CLICK] knob
Adjusts the volume of the click.
4
[CONTROL 1] knob
Modifies the master effects.
[CONTROL 2] knob
[FILTER] button
Turns the filter on/off.
[DELAY] button
Turns the delay on/off.
[S .LOOP] button
Turns the short looper on/off.
[FX] button
Turns FX on/off.
5
TEMPO indicator
This will light in time with the performance tempo.
[START/STOP] button
Turns the click start/stop.
6
Function buttons
These execute the functions shown at the bottom of the display.
In this manual they are called, from left to right, the [F1], [F2], and [F3] buttons .
-
7
[KIT] button
Displays the top screen.
[MENU] button
Accesses various functions, such as overall settings for the entire SPD-SX.
[SAMPLING] button
Captures a sample.
[QUICK] button
Accesses a quick menu (QUICK MENU) specific to each screen.
[ALL SOUND OFF] button
Stops all currently playing sounds.
[PAD CHECK] button
Auditions the sound of the struck pad through headphones.
This button is also used in conjunction with other buttons to perform various
operations.
8
[EXIT] button
Returns you to the previous screen.
This button is also used to cancel an operation.
-
9
[-] [+] buttons
Use these to change kit numbers, wave numbers, or parameter values.
-
10
[ENTER] button
When this button is blinking, press it to execute the operation.
-
11
Cursor buttons
[ ] [ ] [ ] [ ]
Use these buttons to move the cursor.
-
12
FOOT SW indicators
These will light when a signal is received from a footswitch connected to the FOOT
SW jack.
13
TRIG IN indicators
These will light when a signal is received from an external pad or pedal connected to
the TRIG IN jacks.
14
Display
Kit names, wave names, and settings are shown here.