Output assignments (output), Midi settings (midi), Output (p. 43) par – Roland SPD-SX Sampling Pad with 4GB Internal Memory (Black) User Manual
Page 43: E specified (p. 43), P. 43, Customizing a kit
Cust
omizing a K
it
Customizing a Kit
43
Specifying the kit’s tempo according to the length of a wave
This operation calculates the tempo based on the length of a wave, and assigns it as the tempo of the kit (KIT TEMPO).
This is convenient when you want to set the kit tempo based on a wave.
1.
In the KIT screen, choose QUICK MENU
TEMPO MATCH .
2.
Play the pad to which is assigned the wave whose length you want to calculate .
3.
Use the [ ] [ ] buttons and the [-] [+] buttons to specify the time signature (BEAT) and number of
measures (MEASURE) of the wave .
Parameter
Value
BEAT
1/4–16/4, 1/8–16/8
MEASURE
1–999
When you specify the BEAT and MEASURE, the calculated tempo will be displayed.
4.
Press the [ENTER] button .
The calculated tempo will be specified as the KIT TEMPO setting.
Output Assignments (OUTPUT)
Here you can specify the jack(s) from which the sound of each pad will be output.
Parameter
Value
Explanation
OUTPUT
MASTER OUT
Output from the MASTER OUT jacks and the PHONES jack.
KIT FX1
Apply a kit effect (FX1) and output from the MASTER OUT jacks and the PHONES jack.
KIT FX2
Apply a kit effect (FX2) and output from the MASTER OUT jacks and the PHONES jack.
SUB OUT
Output from the SUB OUT jacks and the PHONES jack.
PHONES ONLY
Output from the PHONES jack.
MIDI Settings (MIDI)
Here you can make MIDI-related settings for each pad. Refer to “MIDI Settings for Each Pad (MIDI)” (p. 67).