Menu operation: network setting – Sony BRAVIA XR A95K 55" 4K HDR Smart QD-OLED TV User Manual
Page 103
Data Projector
VPL-GTZ380
Menu Operation: Network Setting
You can configure Internet protocol settings.
Settings
[IPv4 Setting]
[IP Address Setup]: You can select the IP address setting method.
[Auto(DHCP)]: Network settings are automatically assigned by the DHCP server functions such as the router.
[Manual]: Network settings are configured manually. Select the desired item with the
/
(Left/Right) button,
and enter the value with the
/
(Up/Down) button.
When all items have been entered, select [Apply], then press the ENTER button. The entered settings are
applied.
[IP Address]: The IP address of the projector is set.
[Subnet Mask]: The subnet mask of the projector is set.
[Default Gateway]: The default gateway of the projector is set.
[MAC Address]: The MAC address of the projector is displayed. This cannot be changed.
[Apply]: It enables the IP address that has been set manually.
[IPv6 Information]
The IPv6 address information is displayed. Set the IPv6 address from a web browser.
Related Topic
Configuring the Network Settings of the Projector
5-023-481-14(1) Copyright 2020 Sony Corporation
Press the MENU button.
1
Select
[Installation] - [Network Setting] - the desired setting.
2
103