Configuring the network settings of the projector – Sony BRAVIA XR A95K 55" 4K HDR Smart QD-OLED TV User Manual
Page 112
Data Projector
VPL-GTZ380
Configuring the Network Settings of the Projector
You can configure the network settings on the [Network] page in [Advanced Settings].
Note
The entered value will not be applied until the [Apply] button is clicked.
Settings
[IPv4 Setting]
[IP Address Setup]: You can select the IP address setting method.
[Auto(DHCP)]: Network settings are automatically assigned by the DHCP server functions such as the router.
[Manual]: Network settings are configured manually.
[IP Address]: The IP address of the projector is set.
[Subnet Mask]: The subnet mask of the projector is set.
[Default Gateway]: The default gateway of the projector is set.
[IPV6 Setting]
Select [Advanced Settings] - [Network] and display the [Network] page.
1
Configure the [IPv4 Setting] and [IPv6 Setting] items.
2
Check the items in [Ethernet].
The MAC address of the projector is displayed at [MAC Address].
3
Click the [Apply] button.
4
112