Sony BRAVIA XR A95K 55" 4K HDR Smart QD-OLED TV - Manual (Page 131)

Help Guide
Data Projector
VPL-GTZ380
Specifications
Projection System
3 LCD system
Display Device
Size of effective display area: SXRD 0.74-inch (18.8 mm) × 3
Number of pixels: 4096 Ч 2160 Ч 3 pixels
Projection image size
60-inch to 600-inch (1,524 mm to 15,240 mm) (when using VPLL-Z8014)
60-inch to 1200-inch (1,524 mm to 30,480 mm) (when using VPLL-Z8008)
Light source
Laser diode
Inputs/Outputs
HDMI terminal (HDCP 2.3): 2 system
DisplayPort terminal (HDCP 2.3): 2 system
REMOTE terminal: RS-232C, D-Sub 9-pin (Male)
LAN terminal: RJ45, 10BASE-T/100BASE-TX
USB terminal: Type A, DC 5 V, Max. 500 mA
IR terminal: IN: 1 system, OUT: 1 system, mini jack
TRIGGER terminal: 2 system, mini jack, DC 12 V, Max. 100 mA
3D SYNC OUT terminal: 1 system, 3-pin min-DIN (VESA 3D)
This unit is HDCP-compliant.
Outside dimensions (w/h/d)
560 mm × 228 mm × 760 mm (22 1/16 inches × 8 31/32 inches × 29 15/16 inches)
Mass
Approx. 51 kg (112 lb 7.0 oz) (excluding the lens)
Power requirements
AC 200 V to 240 V, 9.9 A to 8.4 A, 50/60 Hz
AC 100 V to 120 V, 12.3 A to 10.1 A, 50/60 Hz (When the unit is used with AC 100 to 120 V, the maximum amount of
light will fall to about 1/3.)
Power consumption
AC 100 V to 120 V: 1,200 W
AC 200 V to 240 V: 1,800 W
Standby power consumption (Standby mode)
0.3 W (When [Remote Start] is set to [Off])
Standby power consumption (Network standby mode)
0.5 W (LAN) (When [Remote Start] is set to [On])
131