Setting advertisement – Sony BRAVIA XR A95K 55" 4K HDR Smart QD-OLED TV User Manual
Page 114
Data Projector
VPL-GTZ380
Setting Advertisement
You can change the control protocol settings of Advertisement on the [Advertisement] page in [Advanced Settings].
Note
The entered value will not be applied until the [Apply] button is clicked.
Settings
[Start Advertisement Service]
Turn Advertisement on or off. The settings related to Advertisement are applied only if it is on.
[Community]
Enter the community names for Advertisement and PJ Talk. If changed, the PJ Talk community name changes as well.
Only 4 alphanumeric characters can be entered. The factory default setting is “SONY.” To avoid unauthorized access to
the projector from another computer, we recommend changing the community name from the one used in the factory
setting.
[Port No.]
Enter the Advertisement transmission port. The factory default setting is “53862.”
[Interval]
Enter the Advertisement transmission interval (seconds). The factory default setting is “30.”
[Broadcast address list]
Enter the Advertisement data transmission recipient. If nothing is entered, it will be broadcast on the same subnet.
5-023-481-14(1) Copyright 2020 Sony Corporation
Select [Advanced Settings] - [Advertisement] and display the [Advertisement] page.
1
Set each item and click the [Apply] button.
2
114