Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 102)

88
5. Measuring
5.
Set the ISO sensitivity value on the [ISO] Icon. (  P197)
6.
Set the shutter speed on the [T] Icon. (  P197)
Measuring Screen
Setting Value
NOTICE
Make sure that the settings are within the specifications of the camera and
flash system.
7.
Press the Measuring Button 6 .
The accumulated measured value (F-stop) and the number of cumulative flashes
will be displayed. Press the Measuring Button
6
until the desired F-stop is
displayed.
Measuring Screen
Flash Component
Measured Value
(F-stop)
Cumulative count
NOTICE
● When the synchro cord is connected to the Synchro Terminal b or when the
meter's Power Button
5
is operated, the flash may fire.
● Also, the flash may not fire when the trigger voltage is very low. In such a case,
follow "5-2-2 Cordless Multi (Cumulative) Flash Mode ". (  P79)
● The EV scale cannot be displayed in this Measuring Mode.