Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 134)

120
6. Functions
NOTE
The Set Average/Contrast Function Icon is set to Function Button -1 Button in
Factory Setting. When the Set Average/Contrast Function Icon is not displayed,
set the Function Button in Custom Setting (  P160), or set the Set Average/
Contrast Function on the Tool Box Screen (  P124).
5.
Touch the Icon ( ) again.
The Average Function is released, and the highlighted
icon ( ) returns to the normal state ( ). Then,
the "Ave" symbol disappears from the screen.
The last measured value is displayed.
Measuring Screen
NOTE
In case that the Average/Contrast Function is assigned to Function Button -1 or -2. (  P160)
Icon Description
Displayed when no measured or memorized values are registered.
Displayed when the Set Average/Contrast Function is disabled.
Displayed when the Set Average/Contrast Function is enabled.