Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 106)

92
5. Measuring
3.
Set the light receiving method.
Switch to the Incident light, extended lumisphere ( )/retracted lumisphere ( ), or
reflected light. (  P32 , P37)
4.
Set the ISO sensitivity value on the [ISO] Icon.
(  P197)
5.
Set the shutter speed on the [T] Icon.
(  P197)
Measuring Screen
Setting Value
NOTICE
Make sure that the settings are within the specifications of the camera and
flash system.
6.
Press the Measuring Button 6 .
The meter will enter the Measuring Standby Mode, and the Measuring Mode Icon
( ) will blink for 90 seconds.
The LCD screen dims and stands by.
Measuring Screen