Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 99)

85
5. Measuring
5-2-3 Cord Flash Mode
In this Measuring Mode, a synchro cord (sold separately) is used to connect the flash to
the meter. Use this Cord Flash Mode when you need to ensure synchronization with the
flash or use a flash bulb. After pressing the Measuring Button
6
, the meter trigger the
flash unit and displays F-stop value.
Operation
1.
Connect the synchro cord (sold
separately), which is connected to
the flash, to the meter. (  P195)
Connect the synchro cord (sold separately) to
the meter's Synchro Terminal
b
.
2.
Touch the Measuring Mode Icon on
the Measuring Screen.
The Measuring Mode Screen is displayed.
3.
Touch the icon ( ) on the Measuring Mode Screen.
When it is selected, the display changes to the Measuring Screen.
Measuring Screen Measuring Screen
[Measuring
Mode] Icon
Measuring Mode Screen
4.
Set the light receiving method.
Switch to the Incident light, extended lumisphere ( )/retracted lumisphere ( ), or
reflected light. (  P32 , P37)
Synchro Terminal
b
Synchro Cord (sold separately)