Factory setting, P193), 1-3 factory setting – Sekonic Speedmaster L-858D-U Light Meter User Manual
Page 207
193
7. Hardware Setting
Operation
1.
Touch the [Factory Setting] Button.
The "Reset to factory default settings. Are you sure?" message is displayed on
the Factory setting Screen.
2.
Touch [Yes] Button.
To perform this operation, touch the [Yes] Button.
The "All measurements will be lost when you perform this operation. Are you
sure?" message is displayed on the Factory Setting Confirmation Screen.
Touch [No] Button to return to the Hardware Setting Screen without performing the
factory setting.
Factory Setting Confirmation Screen
[No] Button [Yes] Button
Factory Setting Screen
[Yes] Button [No] Button
3.
Touch [Yes] Button.
The factory settings are initialized, and the display returns to the Hardware
Setting Screen.
Touch [No] Button to return to the Hardware Setting Screen without performing the
factory setting.
7-1-3
Factory Setting
This function resets all the parameters and settings related to measured values,
setting values, custom settings, user information, etc. to the factory settings.
See "6-7