Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 70)

56
5. Measuring
7.
Press the Measuring Button 6 on the side of the meter to
measure the light.
The measured value (F-stop) will be displayed.
While the Measuring Button 6 is being pressed, the meter measures continuously until
the button is released.
When the Measuring Button 6 is released, the measurement is completed. The
measured value at that time will be displayed in the measured value/measuring unit
display area and on the analog scale. (
 P22 , P24)
Measuring Screen
Viewfinder Display
(in reflected light measurement)
Measured Value (F-stop)
NOTE
● There are 20 preset of frame rates that can be customized. (  P57)
● The T value cannot be set lower than the selected frame rate.