Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 30)

16
3. Screen Operations
No. Part Name Description
7 Flash Component
The percentage of flash light in the total exposure is displayed (in
steps of 10%) (  P73)
8
Measured Value/
Measuring Unit
Display Area
Displays information such as measured values and measuring units.
(  P20)
9
Measured Value
(Additional Data)
Displays the additional data for the measured value. (  P178)
10
Display Incident/
Spot
Displayed when "Select Incident/Spot" is not assigned to Function
Button -1 or -2. (  P33)
11 Analog Scale
Displays various information such as measured values, exposure
profiles, and flash or ambient light components for flash analyzing,
depending on the Measuring Mode. (  P22)
12 Function Button -1
Set the desired function to this Function Button. (  P160)
13 Function Button -2
14 [Tool Box] Icon
To make various settings for the current measurement, touch the
[Tool Box] Icon on the Measuring Screen. (  P26)
Function Button [Selectable in Custom Setting Menu]
Part Name Icon Description
[Set Average/Contrast
Function] Button
Set the Average/Contrast Function.
Used with the Memory Function, displays the average of
up to nine measured values. (  P118)
The Contrast Function displays a difference between
current value and memorized/averaged value when
Measuring Button 6 is pressed.
(Excluding the Multiple (Cumu.) Flash Mode)
[Select Incident/Spot]
Button
Set the light receiving method. (  P32)
Touch to switch between the Incident light (extended
lumisphere or retracted lumisphere) and the reflected
light (spot) measuring system.
[Set Exposure
Compensation] Button
Toggling In/Out set exposure compensation for
measured value. (  P125)
[Filter Compensation]
Button
Toggling In/Out set filter compensation for measured
value. (  P127)
[Mid. Tone] Button
Activate to set current value as Mid-Tone for comparison
on Analog Scale. (  P139)