Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 20)

6
2. Before Use
NOTICE
● The blue lettered "SEKONIC" Logo Screen is displayed
after battery replacement and 24 hours after power OFF.
● The L-858D is executing a memory check while the blue
progress bar is moving on the Logo Screen, so please do
not turn OFF the power, as doing so may lead to damage.
● If the specifications of the transmitter (sold separately)
are not compatible, the "Radio transmitter installed
cannot be used in this meter." message is displayed.
Check that the specifications of the transmitter are
compatible with the meter before turning the power ON.
See the manual for the transmitter (sold separately) for
details.
NOTE
● If the LCD screen shows no display, check if the batteries are installed properly (Pos/Neg
positioning) and have enough capacity.
● The Startup display can be skipped by touching the screen when it appears.
Power OFF
1.
Press the Power Button 5 .
The meter will turn off and the display disappears.
The meter power turns off after the display disappears.
NOTICE
● Please wait 3 seconds between repeated power on and power off sessions.
● If the power is turned off, graphs displayed during the Flash Duration Analysis
Mode will be erased.
NOTE
All settings that are made and measured values that are obtained during use are saved in
the memory even after the meter has been powered off.
Saved data is re-displayed as soon as the meter is turned on.
When the batteries are removed, the stored settings and measured values are saved in the
memory and will be displayed when batteries are installed and the meter is switched ON.
Progress Bar
Power Button
5