Abort – HP E1418A User Manual
Page 64
Advertising
ABORt
The
ABORt
subsystem disables the trigger system and places the trigger system in
the trigger idle state.
Subsystem Syntax
ABORt
Parameters
None.
Comments
•
Following this command, the trigger system is in the idle state. Sending an
INITiate
command after
ABORt
returns the trigger system to the wait-for-trigger
state.
•
Triggering is described in more detail on page 54.
•
Related Commands:
INITiate[:IMMediate]
ABORt
Chapter 3
HP E1418A SCPI Command Reference 63
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertising