HP E1418A - Manual (Page 95)

SOURce n :VOLTage[:LEVel]:TRIGgered[:AMPLitude]?
SOURce n :VOLTage[:LEVel]:TRIGgered][:AMPLitude]? [<MIN | MAX | DEF>
queries the latest value written by either
SOURce n :VOLTage[:LEVel]:TRIGgered[:AMPLitude] or
SOURce n :VOLTage[:LEVel][:IMMediate][:AMPLitude] .
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
SOURce n keyword 1 to 8 or 1 to 16 1
<MIN | MAX | DEF> discrete (optional) MIN | MAX | DEF none
Returns: 32-bit floating point number (float 32).
Comments •
In the keyword, SOURce n, the valid range of n is:
1 to 8 for E1418A, E1418A Option 002
1 to 16 for E1418A Option 001, E1418A Option 003.
Values of n outside these ranges will generate an error.
•
If no parameter is given, this query returns the last value set on channel n by the
SOURce n :VOLTage[:LEVel][:IMMediate][:AMPLitude] or
SOURce n :VOLTage[:LEVel]:TRIGgered[:AMPLitude] command. The value
returned is the value last programmed on that channel, not an actual measurement
of the hardware output value.
•
If a parameter is given,
MIN returns -16.000.
MAX returns +16.000.
DEF returns 0.000.
•
This command generates an error if channel n is in the current output mode.
•
Related Commands: SOURce n :VOLTage[:LEVel]:TRIGgered[:AMPLitude] ,
SOURce n :FUNCtion:MODE VOLTage
SOURce
94 HP E1418A SCPI Command Reference Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com