Honeywell 9782 Series - Manual (Page 125)

Maintenance
7/99 9782 Series Conductivity/Resistivity Analyzer/Controller - Operator’s Manual 10-9
10.5 Adjusting the Screen Contrast
Introduction
The display contrast can be adjusted to suit the viewing conditions at the installation site.
Procedure
To adjust the display contrast, follow the procedure in Table 10-4.
Table 10-4 Procedure for Adjusting the Screen Contrast
Step Screen Action
1 MENU
CONFIGURATION
CALIBRATION
MAINTENANCE
I/O SETUP
DIAGNOSTICS
| PREV | NEXT
Go to MAINTENANCE | INSTRUMENT SETUP | SCREEN
CONTRAST.
MAINTENANCE
OFFLINE FUNCTIONS
INSTRUMENT SETUP
LEAD RESISTANCE COMP
DIAGNOSTICS
| PREV | NEXT
INSTRUMENT SETUP
INSTURMENT TAGGING
PRODUCT INFO
SCREEN CONTRAST
SECURITY
RESET UNIT
DIAGNOSTICS
| |
2 SCREEN CONTRAST
20
USE UP/DOWN ARROW
KEYS TO ADJUST
ENTER TO SAVE
DIAGNOSTICS
| |
Use the UP and DOWN keys to adjust the contrast
between 0 and 20.
When the displayed contrast is acceptable, use the
ENTER key to return to the instrument setup menu. The
new contrast setting will be saved automatically.