Honeywell 9782 Series - Manual (Page 26)

Conductivity/Resistivity Analyzer/Controller
9782 Series Conductivity/Resistivity Analyzer/Controller - Operator’s Manual 7/99 1-12
Table 1-2 9782 Conductivity/Resistivity Analyzer/Controller Menu Hierarchy
Menu Item Purpose Where
Described
MAINTENANCE do occasional system tasks Sections 9 and
10
OFF-LINE FUNCTIONS [see functions listed below] [see below]
DISPLAY TEST test display 9.5.1
KEYBOARD TEST test keyboard 9.5.1
OUTPUT TESTS test relays and analog outputs 9.5.2
OUTPUT CALIBRATION calibrate outputs electrically 10.2
INSTRUMENT SETUP [see functions listed below] [see below]
INSTRUMENT TAGGING configure tagname or other text to be
displayed at the top of the screen 10.3
PRODUCT INFORMATION view software version and stored model
number; if a special technical support
password is known, alter model number in
memory (in case of hardware upgrades)
10.4
SCREEN CONTRAST adjust display contrast 10.5
SECURITY assign password to limit access to
configuration, calibration, and maintenance
functions 10.6
RESET UNIT reset all configuration and calibration
values back to factory settings 10.7
LEAD RESISTANCE COMP
[wide range models only] specify wire gauge and length when long
leads are used; instrument will compensate
for these long leads 10.8
I/O SETUP choose features, make relay and analog
output assignments 5.3