Honeywell 9782 Series - Manual (Page 33)

Specifications and Model Number
7/99 9782 Series Conductivity/Resistivity Analyzer/Controller - Operator’s Manual 2-1
2. Specifications and Model Number
2.1 Specifications
2.1.1 User Interface
Display
LCD dot matrix display, 128 by 64 dpi. Backlit: solid state LED. Displays Cell 1 and Cell 2
values in terms of conductivity, resistivity, concentration, or TDS (temperature compensated or
not compensated); Cell 1 and Cell 2 temperature; computed value (if enabled); time (if clock is
enabled); time remaining in AutoClean cycle (if feature is configuration); alarm conditions, and
diagnostics.
Alarm messages, status messages, and diagnostic messages are available on all displays.
Keypad
Monoplanar front panel with 8 keys. Push-button entry with tactile feedback.
2.1.2 Physical
Case
Gray Noryl plastic, NEMA 4X/IP55 Rainproof and Outdoor. Interior conductive coating to
provide effective RFI/EMI shielding.
Case Dimensions
156 x 156 x 178 mm (6 1/8 x 6 1/8 x 7 in.); panel cutout 141 x 141 mm (5.53 x 5.53 in.).
Weight
1.8 kg (4 lb).
Mounting
Panel mounting hardware supplied. Surface and pipe mounting hardware available. See Figure
3-2 or the Parts List.
2.1.3 Compliance
FM/CSA
This product has FM and CSA Hazardous Location Approval for Class I, Div. 2, Groups A, B, C
and D classified areas.