Honeywell 9782 Series - Manual (Page 39)

Specifications and Model Number
7/99 9782 Series Conductivity/Resistivity Analyzer/Controller - Operator’s Manual 2-7
2.2 Model Number Breakdown
Introduction
The model number breakdown is presented in the tables that follow.
The basic model number consists of a key number. Appended to this key number are characters
that identify the features in various categories. The meaning of the characters in each category is
presented in a table identified below. Note that because Tables III and IV do not affect I/O and
configuration parameter selection, the characters in these tables are displayed as “don’t care”
conditions (X) in product information viewed using the maintenance menu.
Instructions
9782 Analyzer Offers:
Standard - Backlit Display
Standard - 120/240 Volt Power Requirements
Standard - All models CE Compliant
Standard - All Conductivity models are 2 cell inputs
Standard - Built-in software for ON/OFF, Duration Adjusting and Pulse
Frequency Type Discrete Control with Standard and/or Optional relays,
Menu Driven Prompts for Display / Programming / Maintenance,
Text messages for Alarms/Diagnostics
Standard - FM Haz. Loc. Approval, Class I, DIV 2 (relays rated for 120 volt max)
Optional - Built-in software for proportional only Current Adjusting type control
with the selection of a 4-20 mA output(s)
9782S - Specific Ion Analyzer Offers:
Standard - All of the above
Standard - All Specific Ion models include one 4-20mA output and 4 relays
(No other options from Table II)
Select the desired key number. The arrow to the right marks the selection available.
Make one selection from Tables using the column below the proper arrow.
A dot ( ) denotes unrestricted availability.
Key Number I II III IV
_ _ _ _ _ - _ _ - _ _ - _ _ _ _ _ _ - _ _
KEY NUMBER Selection Availability
Description
pH/ORP 9782P
Conductivity 9782C
Specific Ion 9782S