Hughes Direcway DW6000 - Manual (Page 116)

Appendix B • Installing the indoor equipment using dial-up commissioning
82
1033295-0001 Revision 2
5. Connect the component interconnection cables. See
Figure 66 for final cabling. An Ethernet cable connects the
DW6000 and the installer PC. A power supply adapter cable
attaches to the DC IN port. Two coaxial cables lead to the
satellite antenna; label the transmit and receive cables but
do not connect the coaxial cables at this time.
6. Attach the power supply cords to the power supply and to the
power adapter. Ensure that the power cord is tightly
connected to the power supply DW6000.
Power up and read the
DW6000 LED display After you connect the cables to the DW6000, connect the power
strip or surge protector to a 110 V wall outlet or other power
source. The DW6000 LEDs will come on in the following order:
1. Power LED comes on solid to indicate the DW6000 is
powered up.
Figure 66: Attach interconnection cables
Transmit cable
(Satellite Out)
AC power
cord
Ethernet
cable
E
th
ernet
Receive cable
(Satellite In)
Power
supply
DC power
cord