Force ranging, Caution – Hughes Direcway DW6000 User Manual
Page 148
Advertising
Appendix C • Installing the DW6000 using Installer Console
114
1033295-0001 Revision 2
Force ranging Use the
d
option to force-range the unit and verify the ranging
status. The status must indicate “Transmitter available for normal
operation” if ranging completes successfully.
Ranging must be done before you exit the
Installation Menu.
CAUTION
Any time you enter the DW6000 Installation Menu, the
transmitter is turned off for safety reasons. Do not enter "i"
to access the Installation Menu after this point unless
instructed to do so by a technician at the NOC.
Figure 105: Display Main Statistics
Advertising