Hughes Direcway DW6000 - Manual (Page 44)

Chapter 2 • Installing the indoor equipment
20
1033295-0001 Revision 2
7. Select a satellite/transponder combination that corresponds
with the work order or the current transponder assignment
from the drop down list and select Next. A
Verification screen
appears. See Figure 19. If you are using OPI to point the
antenna you must check the
Enable OPI Display box at the
bottom of the screen.
If you wish, you can enter the location manually.
Enter
location manually in Figure 18 must be checked. When you
select Next the Transponder - Manual Entry screen appears.
See Figure 20. Enter the longitude, frequency, and symbol
rate, and select the polarization. Then select Next and the
verification screen appears.
Figure 18: Choose transponder
Figure 19: Transponder - Verification