Honeywell GNS-XL - Manual (Page 132)

System Operation
3-17b GNS-X L Flight Management System
Rev. 4
Nov/04
Overfly then DIRECT TO Procedures
For procedures that require over-flying a waypoint (Figure 3-21b),
then a Direct To the next waypoint, follow these operational require-
ments for the example following:
1. Prior to departure, select MAN leg change mode on NAV Page 1
and press ENTER.
2. Select the FMS as the NAV source.
3. Accurately fly the runway course or heading.
4. Immediately after passing WW166, press the d key, cursor
over BRKNB and press ENTER.
NOTE: This is known as the FMS Direct TO procedure.
ZH554
N47 24.8
E008 18.5
ZH582
N47 27.7
E008 29.7
2
8
LASUN
3Y
ZH569
N47 24.0
E008 13.9
Procedure Requirement
Fly straight ahead, over fly ZH582, left turn
intercept 255° course inbound to ZH554.
(LSZH LASUN 3Y)
WW166
N48 01.3
E016 37.2
MIKOV
2B
WW272
N48 11.6
E016 47.3
Procedure Requirement
Fly straight ahead, over fly WW166, left turn
direct to BRK.
(LOWW MIKOV 2B)
BRUCK
408 BRK
N48 03.8 E016 43.0
Figure 3-21b
Figure 3-21a