Honeywell GNS-XL - Manual (Page 152)

System Operation
3-36.1 GNS-X L Flight Management System
Rev. 2
Apr/00
SELECTING A COMPANY ROUTE AND ADDING IT TO THE
ACTIVE FLIGHT PLAN
1. Display the COMPANY ROUTES Page (automatically after ini-
tialization, or by paging the FPL pages).
NOTE: If the data base contains company routes, the first page dis-
played after system initialization will be the COMPANY ROUTES
page in lieu of the FLIGHT PLAN LIST page. If both AFIS and
Company Routes are present, the COMPANY ROUTES page is dis-
played first.
NOTE: Typically, the COM-
PANY ROUTES page will
display the location entered
on the initialization page (if
available) in the Origin field,
with the cursor over both the
Origin and Destination field,
ready for entry of the
Destination.
2. Line Select Key LSR2 - If
you desire to change the
Origin entry, DEPRESS to
position cursor over only
ORIGIN field on the COM-
PANY ROUTES page,
and type in desired identi-
fier. (Figure 3-59a) If the
cursor is over both fields,
and the Origin is correct,
proceed to the next step.
(Figure 3-59b)
3. DESTINATION identifier
- VERIFY or INSERT
valid ident. (Figure 3-
59b)
4. ENT Key - DEPRESS.
(Figure 3-59c) If the pair is
valid and has only one
VIA, the ACTIVE FLIGHT
PLAN page is now dis-
played with the waypoints
of the pair added.
COMPANY ROUTES 1/1
<
>
>
ORIGIN KCOF
DESTINATION ------
VIA ------
R#------
Figure 3-59a
COMPANY ROUTES 1/1
<
>
>
ORIGIN KCOF
DESTINATION ------
VIA ------
R#------
Figure 3-59b
COMPANY ROUTES 1/1
<
>
>
ORIGIN KCOF
DESTINATION KEFD
VIA ------
R#------
Figure 3-59c