Honeywell GNS-XL - Manual (Page 321)

3. ENTER Key - DEPRESS.
4. Line Select Key - DEPRESS to position cursor over SEL option
of PRINTER CTRL field.
5. ENTER Key - DEPRESS to access the PRINTER CONTROL
page.
6. Line Select Key - DEPRESS to position cursor over WEATHER
DEST.
7. BACK Key - DEPRESS to cycle destination field between PRT1,
PRT2, and BOTH.
8. ENTER Key - DEPRESS to set Message Destination field to its
present value (PRT1, PRT2, or BOTH.)
AUTO FORM FEED
The Auto Form Feed option, when set to YES, will cause the printer
to Form Feed, or eject the page, after each message or weather
report is printed. Setting the Auto Form Feed option to NO will print
messages and weather reports on the same page until the page is
full, then eject the page.
1. AFIS key - DEPRESS to display AFIS MENU page.
2. Line Select Key - DEPRESS to position cursor over OPERATING
MODES.
3. ENTER Key - DEPRESS.
4. Line Select Key - DEPRESS to position cursor over SEL option
of PRINTER CTRL field.
5. ENTER Key - DEPRESS to access the PRINTER CONTROL
page.
6. Line Select Key - DEPRESS to position cursor over AUTO
FORM FEED.
7. BACK Key - DEPRESS to toggle Auto Form Feed option
between YES and NO.
8. ENTER Key - DEPRESS to set Auto Form Feed to its present
value (YES or NO.)
Auto Form Feed currently applies to the -0211 and the -2011 DMUs.
7-55 GNS-X L Flight Management System AFIS Operation
Rev. 3
Oct/02