Honeywell GNS-XL - Manual (Page 135)

System Operation
3-20 GNS-X L Flight Management System
Rev. 4
Nov/04
the first runway on the RUN-
WAY identifier list and RUN-
WAY field is highlighted in
yellow. See Figure 3-25. If
runway is not required, pro-
ceed to Step 11.
9. Line Select Key -
DEPRESS to position
cursor over the desired
runway.
10. ENT Key - DEPRESS to
select RUNWAY.
11. Departure SID Waypoints
- REVIEW (Figure 3-26),
then DEPRESS the ENT
Key to select the SID and
insert it into Active Flight
Plan. The display will
automatically return to the
ACTIVE FLIGHT PLAN
Page.
NOTE: If SID is added to a stored flight plan this display will return to
the stored flight plan page after SID is selected.
NOTE: SID waypoints appear indented from other waypoints in a
Flight Plan that are not part of a procedure. ( SID, STAR,
APPROACH)
REVIEWING A SID FROM ANY STORED FPL OR THE ACTIVE
FPL PAGE
1. Line Select Key -
DEPRESS to position
cursor over the DEPART
field on the FLIGHT
PLAN
Page.
2. ENT Key - DEPRESS to
review SID (Figure 3-27).
3. BACK Key - DEPRESS
to return to Flight Plan
Page.
RUNWAY RW16L
SID ELMAA3
TRANSITION HQM
WAYPOINTS OF SID:
ELMAA
HQM
SELECT? ERASE
DEPARTURE KSEA 1/1
>
>
>
Figure 3-26
RUNWAY RW16L
SID ELMAA5
TRANSITION HQM
WAYPOINTS OF SID:
ELMAA
HQM
ERASE
DEPARTURE KSEA 1/1
>
>
>
Figure 3-27
RUNWAY -----
SID ELMAA3
TRANSITION HQM
DEPARTURE KSEA 1/1
>
>
Figure 3-25