Receiving a system alarm, Receiving a system alarm -51 – Hitachi HCX5000I User Manual
Page 122
C
HAPTER
2: A
DDITIONAL
O
PERATIONS
R
ECEIVING
A
S
YSTEM
A
LARM
HCXTD840, Issue 1, July 2001
2-51
The CALM
key
When you press the <CALM> key, the alarm(s) that have
occurred are displayed in the LCD:
About PMS
The PMS alarm applies to WelCOMM systems only.
Programming
alarms
Some or all of the combined alarms can be programmed as
a single alarm at a separate key.
Receiving a System Alarm
The
<ALARM>
key
The <ALARM> key lights in the case of either a major or
minor system alarm. If you notice that the <ALARM>
lamp is lit, contact your system administrator immediately.
The <ALARM> lamp remains lit until the condition
causing the alarm is corrected.
Display
Meaning
MJ/MN
Major/minor system alarm
ANSDET
Answer detection link alarm
PMS
PMS/PMSHOBIC link alarm
VMS
VMS link alarm