Hitachi HCX5000I User Manual
Page 157
R
EDIALING
N
UMBERS
S
ELEC
S
ET
500A U
SER
G
UIDE
2-86
HCXTD840, Issue 1, July 2001
Saved number
redial (SNR)
Use saved number redial to save your most recently dialed
number and cause the last number redial function to ignore
any new numbers that you dial.
To save the number you just dialed...
1
Press the <SNR> key. The <SNR> lamp lights.
Note:
You can press the <SNR> key as soon as the
number is dialed, or you can wait until you hang
up before pressing the key.
To dial the saved number...
2
Press the <LNR> key.
To cancel the saved number and reactivate LNR...
3
Press the <SNR> key again.
Example
You plan to call parties A, B, and C this afternoon. You
just called A, who was busy. Press <SNR> to save her
number. Now dial B and then C, which LNR ignores.
Later, press <LNR> to dial A's number. A's number
remains stored until you press <SNR> again to cancel it.
To use LNR …
To use SNR …
• Press <LNR>.
1
Press <SNR> (SNR lamp on)
2
Press <LNR> to dial the SNR
number.
3
Press <SNR> to cancel