Hitachi HCX5000I - Manual (Page 65)

M ESSAGING S ELEC S ET 500A U SER G UIDE
1-54 HCXTD840, Issue 1, July 2001
Procedure To turn on the message waiting lamp while talking to a
covering station:
1 While talking to the covering station, press the
<CLME> key.
2 Your <CLME> lamp lights and the called station’s
message waiting lamp is lit, not the lamp of the
covering station to which you are currently connected.
Because you are not connected to the station whose
message waiting lamp you have activated, you do not
receive either confirmation tone or a confirmation
display. A confirmation tone or display might lead
you to believe you activated the message waiting light
of the station to whom you are talking.
Turning a
message
waiting lamp
off Follow these steps to turn a message waiting lamp off:
1 When a user calls you because his message lamp is
flashing, your <CLME> lamp lights.
2 Press your <CLME> key to extinguish the caller’s
message waiting lamp.
3 To extinguish a message waiting lamp when you are
not connected to the station, dial the callme
cancellation code (usually ##0), then the station
number.