Hitachi HCX5000I - Manual (Page 159)

S ENDING P USHBUTTON T ONES S ELEC S ET 500A U SER G UIDE
2-88 HCXTD840, Issue 1, July 2001
Procedure To send pushbutton tones:
1 Connect to the pushbutton-controlled equipment (e.g.
the voice mail system).
2 Press the <TONE> key. The <TONE> key lights.
3 Generate pushbutton tones by pressing keys on the
keypad.
Procedure,
continued 4 When you finish sending pushbutton tones, press the
<TONE> key again.
Note: The <TONE> key lamp is extinguished and your
console is returned to normal operation. To
transfer a call when the <TONE> key is lit, press
<JOIN> before dialing the desired number. After
dialing, press <JOIN> again to transfer the call.