Hitachi HCX5000I - Manual (Page 182)

D ETERMINING IF A D ATA A DAPTER IS A SSIGNED
HCXTD840, Issue 1, July 2001 A-11
Determining if a Data Adapter is Assigned
Procedure To determine if a data adapter is assigned:
1 Press and hold the <DA> key to display a new line
above the key labels. This display tells you if a data
adapter is assigned to the console.
2 Lift your console to see if a wedge-shaped device
(data adapter) is attached underneath and the console
has short legs attached to it. When you first assign a
data adapter, use this test procedure to confirm that
your data adapter is assigned properly. See
Figure A-8
for an example of a display showing data adapter
assignment.
Figure A-8: Displaying data adapter assignment
If a data adapter is assigned to your console, the display
reads DATA ADAPTER = YES.
*** DATT TEST ***
KEY NO. =
RINGING FREQUENCY =
RINGING LEVEL =
RINGING PATTERN =
DATA ADAPTER =
OFF
NORMAL
LINE-LINE (USA)
NO
R-FRQ R-LEV R-PTN DA ROM LCD